When the customer owns the resin, a shortage or mixed lot can stop production and create an argument about responsibility after the material is already consumed. A delivery note alone does not show whether bags arrived sealed, whether the exact grade was released, how much was used for purge, or what happened to leftovers.
Treat customer-supplied resin as controlled customer property with an agreed material specification, custody ledger, receiving checks, grade-specific storage and drying, authorized loss rules, lot-to-part traceability, and a written disposition for unused stock. Ownership does not transfer responsibility for producing conforming parts, and the molder should not change or blend the material without authorization.
Agree the material and commercial baseline
The phrase “customer supplies resin” leaves unanswered who buys freight, verifies suitability, absorbs shortages and owns residues.
List manufacturer, complete grade, color, additive package, approved source, packaging form, expected quantity, delivery point and ownership. Define which party controls the specification and what happens if supplied material cannot support the quoted process or schedule.
The quotation should identify whether the molder’s price excludes resin cost only or also excludes inbound freight, receiving inspection, special storage, drying, testing and disposal. State whether the material is consigned for one part, one program or several tools. If the customer supplies a color concentrate separately, define the carrier, ratio and authorization. Do not infer automotive approval from a label or a general material family. The RFQ should provide the controlled specification and any customer-restricted source. Shortage, excess and obsolete stock rules belong in the commercial baseline before the first delivery.
Build the review around the controlled material specification, purchase/consignment terms and approved packaging and quantity basis. The decision is whether the parties identify the exact resin and allocate ownership, freight, verification and disposition responsibilities. Customer purchasing leverage can reduce material price, but split responsibility adds custody, scheduling and shortage risk that should be priced and controlled.
Inspect identity and package condition at receipt
A sealed pallet can still contain the wrong lot, damaged moisture barriers or quantities that do not match the shipping record.
Receive by purchase or consignment reference and record manufacturer, grade, color, lot, production date where provided, package count, net weight basis, seal condition and visible contamination or damage. Quarantine discrepancies before material reaches shared handling equipment.
Photograph damaged bags and preserve the label. Reconcile gross and net quantities using the agreed method rather than inventing a loss after production. Check whether a certificate, packing list or customer release is required, but do not treat a certificate as physical identification of every bag. Condensation can occur when cold material enters a warm humid plant; the material supplier’s instructions should control any acclimation or drying decision. Use status labels that distinguish received, quarantined, released, opened and returned material. A mixed pallet should retain lot separation unless the customer authorizes a lot-combination rule.
The working record should contain receiving log, package photographs, labels, quantity reconciliation and quarantine/release records rather than a conclusion copied into email. Review the source, revision, units, sample selection and boundary conditions, then test whether only correctly identified and acceptable packages enter released inventory. More receiving evidence costs handling time, while weak receiving control shifts disputes to a stage where material identity and condition may no longer be recoverable.
Protect material during storage and transfer
Once a barrier package is opened, warehouse humidity, conveying, shared hoppers and partial bags can change the material state or identity.
Follow the exact grade’s storage and handling instructions. Keep released lots segregated, reseal partial bags with identification, control FIFO or customer-defined rotation, and clean shared transfer paths where contamination could affect the part.
BASF product information for a specific Ultraform grade distinguishes unopened supply from material held in previously opened containers; that is an example of grade-specific guidance, not a rule for every polymer. Storage limits, shelf life and drying need the current supplier document for the supplied grade. Define maximum open exposure if the supplier supports one, and record transfers from original bags into dryers, day bins or hoppers. Prevent labels from becoming detached from the material. If inventory is moved between sites, preserve custody and environmental conditions. Do not return unidentified partial resin to released stock.
Ask the supplier to connect warehouse locations, seal status, lot ledger, transfer logs and the current grade-specific handling document to the proposed part and production state. The evidence is sufficient only when material remains identifiable and protected from moisture, contamination and unauthorized mixing. Dedicated containers simplify control but consume space; shared systems may be economical only when cleaning and line-clearance evidence is credible.
Control drying by material condition, not one setting
A dryer-temperature value cannot prove that hygroscopic pellets reached the required moisture condition.
Use supplier instructions for the exact grade and monitor the relevant combination of temperature, time, dew point, airflow and hopper residence. Where moisture content is a release requirement, use a suitable measurement method and sampling point.
NOVATEC explains that heat releases bound moisture, low-dew-point air creates the driving force, sufficient time allows diffusion, and airflow maintains the hopper temperature profile. A display can be within setpoint while material at the throat has not received the required exposure. Record start time, interruptions, added wet material and residence. Avoid excessive drying where the supplier warns of degradation or additive loss. If customer material arrives with unknown exposure, place it on hold until the responsible material owner and supplier guidance define recovery. Drying cannot correct contamination or the wrong grade.
Use grade-specific drying instruction, dryer trend or checks, hopper loading history and moisture evidence where required to challenge the preferred option. The release test is whether the resin entering the machine has a supportable and traceable preparation state. Moisture measurement provides direct evidence but adds sampling and method controls; process records alone may be adequate only when the agreed requirement permits them.
Reconcile consumed quantity and production loss
Resin ownership becomes contentious when good-part mass is subtracted from delivery quantity and every other gram is called unexplained loss.
Agree categories for saleable parts, runners, purge, start-up holds, samples, rejects, retained specimens, spills and remaining inventory. Reconcile by defined weighing or transaction methods and investigate differences beyond an agreed threshold.
The expected material requirement should use part and runner mass, cavity count and planned quantities, then add explicit allowances for setup, color clearing and validation. Record actual accepted quantity and non-saleable categories by lot where practical. If regrind is permitted, define source, mixing, ownership and traceability; otherwise isolate it from virgin consigned stock. Do not hide process instability inside a broad loss factor. A shortage forecast should be raised before the next run, with lead time and consequences, rather than discovered after the hopper empties.
Before closing this point, reconcile material balance by lot, production counts, purge and reject records, retained samples and physical inventory with the controlled product definition. The reviewer should be able to show that consumption and loss are explainable on the agreed basis and shortages are visible early. A perfect gram-level balance may not be practical for all handling systems, but broad unmeasured allowances undermine both customer property control and process improvement.
Dispose, return or retain unused stock under written authority
Leftover resin can become obsolete, absorb moisture or be consumed on another job if its status and owner are unclear.
At program, order or lot close, reconcile sealed and opened inventory and obtain an authorized disposition: retain for the next release, return, transfer to another approved part, requalify, recycle or dispose. Preserve evidence of the chosen action.
Define storage charges, minimum return quantity, freight, packaging, shelf-life review and who accepts opened material. A return should list lot, quantity, seal status and condition; it should not convert suspect material into released customer inventory. If material remains at the molder, connect it to forecast and expiration review. If the customer directs disposal, keep the required destruction or recycling record without making unsupported sustainability claims. When the product revision or approved grade changes, quarantine old stock until engineering and purchasing agree its disposition.
Release from this stage should cite closing inventory, package condition, shelf-life status, customer authorization and return or disposal record and explain why every remaining quantity has a traceable owner, condition and authorized next use. Retaining stock can protect the next release from lead-time risk, while long storage increases condition, obsolescence and reconciliation exposure.
Customer-owned resin custody ledger
Maintain the ledger by manufacturer lot and physical container status rather than only by purchase order. Connect material issues and losses to lot-to-part genealogy so the balance can also identify affected finished lots.
| Review line | Input or evidence | Decision or action |
|---|---|---|
| Dispatch/receipt | Shipping reference, lot, package count, weight basis and condition | Accept, quarantine or claim |
| Release | Specification revision, customer release and certificate requirements | Authorize one part/program use |
| Storage | Location, seal status, shelf-life review and environment | Keep identity and condition controlled |
| Preparation | Dryer, time, temperature, airflow/dew-point and moisture record as applicable | Release to the machine |
| Consumption | Accepted parts, runner, purge, holds, rejects and samples | Explain material balance |
| Closeout | Physical remainder and authorized return, retention or disposal | Close customer-property custody |
The ledger is most useful when warehouse, production, quality and purchasing use the same categories. Differences should trigger investigation while bags, labels and production records can still be checked.
Applying the method to a defined situation
A customer sends two lots of a moisture-sensitive resin for a short production release. One pallet arrives sealed; several bags on the second pallet are punctured. Receiving quarantines the damaged bags, records their labels and informs the material owner. Production plans the run from the released lot and records dryer loading, start-up purge, samples, accepted parts and remaining sealed bags. The customer later authorizes drying and moisture verification for the damaged quantity rather than silently blending it. At closeout, sealed and opened remainder are listed separately so the next order does not assume they have the same condition.
This illustrative scenario is not a customer case.
Questions for the supplier review
- What exact grade, color and approval document controls the supplied resin?
- Which party owns inbound freight, receiving tests and shortages?
- How are opened bags, lots and shared conveying paths identified and controlled?
- What evidence releases the grade from drying to molding?
- Which loss categories and reconciliation tolerance apply?
- Who can authorize use, return, requalification or disposal of leftovers?
Information to submit for a project-specific review
Provide the resin manufacturer and complete grade, color/additive requirement, customer specification, packaging and lot details, available quantity, delivery timing, storage/drying instructions, permitted loss and regrind rules, and unused-stock disposition expectations. Submit these inputs through the AutoMoldingPro request form. Mark unresolved points as assumptions so they can be priced and closed before tooling or production commitment.
Conclusion
Control customer-supplied resin as both a production input and customer property. Identity, condition, preparation, quantity and disposition need one traceable chain; ownership alone does not prove suitability or excuse an uncontrolled process.